SUBROUTINE iau_ATIO13 ( RI, DI, UTC1, UTC2, DUT1, : ELONG, PHI, HM, XP, YP, PHPA, TC, RH, WL, : AOB, ZOB, HOB, DOB, ROB, J ) *+ * - - - - - - - - - - - * i a u _ A T I O 1 3 * - - - - - - - - - - - * * CIRS RA,Dec to observed place. The caller supplies UTC, site * coordinates, ambient air conditions and observing wavelength. * * This routine is part of the International Astronomical Union's * SOFA (Standards of Fundamental Astronomy) software collection. * * Status: support routine. * * Given: * RI d CIRS right ascension (CIO-based, radians) * DI d CIRS declination (radians) * UTC1 d UTC as a 2-part... * UTC2 d ...quasi Julian Date (Notes 1,2) * DUT1 d UT1-UTC (seconds, Note 3) * ELONG d longitude (radians, east +ve, Note 4) * PHI d geodetic latitude (radians, Note 4) * HM d height above ellipsoid (m, geodetic Notes 4,6) * XP,YP d polar motion coordinates (radians, Note 5) * PHPA d pressure at the observer (hPa = mB, Note 6) * TC d ambient temperature at the observer (deg C) * RH d relative humidity at the observer (range 0-1) * WL d wavelength (micrometers, Note 7) * * Returned: * AOB d observed azimuth (radians: N=0,E=90) * ZOB d observed zenith distance (radians) * HOB d observed hour angle (radians) * DOB d observed declination (radians) * ROB d observed right ascension (CIO-based, radians) * J i status: +1 = dubious year (Note 2) * 0 = OK * -1 = unacceptable date * * Notes: * * 1) UTC1+UTC2 is quasi Julian Date (see Note 2), apportioned in any * convenient way between the two arguments, for example where UTC1 * is the Julian Day Number and UTC2 is the fraction of a day. * * However, JD cannot unambiguously represent UTC during a leap * second unless special measures are taken. The convention in the * present routine is that the JD day represents UTC days whether * the length is 86399, 86400 or 86401 SI seconds. * * Applications should use the routine iau_DTF2D to convert from * calendar date and time of day into 2-part quasi Julian Date, as * it implements the leap-second-ambiguity convention just * described. * * 2) The warning status "dubious year" flags UTCs that predate the * introduction of the time scale or that are too far in the * future to be trusted. See iau_DAT for further details. * * 3) UT1-UTC is tabulated in IERS bulletins. It increases by exactly * one second at the end of each positive UTC leap second, * introduced in order to keep UT1-UTC within +/- 0.9s. n.b. This * practice is under review, and in the future UT1-UTC may grow * essentially without limit. * * 4) The geographical coordinates are with respect to the WGS84 * reference ellipsoid. TAKE CARE WITH THE LONGITUDE SIGN: the * longitude required by the present routine is east-positive * (i.e. right-handed), in accordance with geographical convention. * * 5) The polar motion XP,YP can be obtained from IERS bulletins. The * values are the coordinates (in radians) of the Celestial * Intermediate Pole with respect to the International Terrestrial * Reference System (see IERS Conventions 2003), measured along the * meridians 0 and 90 deg west respectively. For many applications, * XP and YP can be set to zero. * * 6) If hm, the height above the ellipsoid of the observing station * in meters, is not known but phpa, the pressure in hPa (=mB), is * available, an adequate estimate of hm can be obtained from the * expression * * hm = -29.3 * tsl * log ( phpa / 1013.25 ); * * where tsl is the approximate sea-level air temperature in K * (See Astrophysical Quantities, C.W.Allen, 3rd edition, section * 52). Similarly, if the pressure phpa is not known, it can be * estimated from the height of the observing station, hm, as * follows: * * phpa = 1013.25 * exp ( -hm / ( 29.3 * tsl ) ); * * Note, however, that the refraction is nearly proportional to * the pressure and that an accurate phpa value is important for * precise work. * * 7) The argument WL specifies the observing wavelength in * micrometers. The transition from optical to radio is assumed to * occur at 100 micrometers (about 3000 GHz). * * 8) "Observed" Az,ZD means the position that would be seen by a * perfect geodetically aligned theodolite. (Zenith distance is * used rather than altitude in order to reflect the fact that no * allowance is made for depression of the horizon.) This is * related to the observed HA,Dec via the standard rotation, using * the geodetic latitude (corrected for polar motion), while the * observed HA and RA are related simply through the Earth rotation * angle and the site longitude. "Observed" RA,Dec or HA,Dec thus * means the position that would be seen by a perfect equatorial * with its polar axis aligned to the Earth's axis of rotation. * * 9) The accuracy of the result is limited by the corrections for * refraction, which use a simple A*tan(z) + B*tan^3(z) model. * Providing the meteorological parameters are known accurately and * there are no gross local effects, the predicted astrometric * coordinates should be within 0.05 arcsec (optical) or 1 arcsec * (radio) for a zenith distance of less than 70 degrees, better * than 30 arcsec (optical or radio) at 85 degrees and better * than 20 arcmin (optical) or 30 arcmin (radio) at the horizon. * * 10) The complementary routines iau_ATIO13 and iau_ATOI13 are self- * consistent to better than 1 microarcsecond all over the * celestial sphere. * * 11) It is advisable to take great care with units, as even unlikely * values of the input parameters are accepted and processed in * accordance with the models used. * * Called: * iau_APIO13 astrometry parameters, CIRS-observed, 2013 * iau_ATIOQ quick CIRS to observed * * This revision: 2016 February 2 * * SOFA release 2021-05-12 * * Copyright (C) 2021 IAU SOFA Board. See notes at end. * *----------------------------------------------------------------------- IMPLICIT NONE DOUBLE PRECISION RI, DI, UTC1, UTC2, DUT1, ELONG, PHI, HM, XP, YP, : PHPA, TC, RH, WL, AOB, ZOB, HOB, DOB, ROB INTEGER J INTEGER JS DOUBLE PRECISION ASTROM(30) * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - * Star-independent astrometry parameters for CIRS->observed. CALL iau_APIO13 ( UTC1, UTC2, DUT1, ELONG, PHI, HM, XP, YP, : PHPA, TC, RH, WL, ASTROM, JS ) * Abort if bad UTC. IF ( JS.LT.0 ) GO TO 9 * Transform CIRS to observed. CALL iau_ATIOQ ( RI, DI, ASTROM, AOB, ZOB, HOB, DOB, ROB ) * Return OK/warning status. 9 CONTINUE J = JS * Finished. *+---------------------------------------------------------------------- * * Copyright (C) 2021 * Standards Of Fundamental Astronomy Board * of the International Astronomical Union. * * ===================== * SOFA Software License * ===================== * * NOTICE TO USER: * * BY USING THIS SOFTWARE YOU ACCEPT THE FOLLOWING SIX TERMS AND * CONDITIONS WHICH APPLY TO ITS USE. * * 1. The Software is owned by the IAU SOFA Board ("SOFA"). * * 2. Permission is granted to anyone to use the SOFA software for any * purpose, including commercial applications, free of charge and * without payment of royalties, subject to the conditions and * restrictions listed below. * * 3. You (the user) may copy and distribute SOFA source code to others, * and use and adapt its code and algorithms in your own software, * on a world-wide, royalty-free basis. That portion of your * distribution that does not consist of intact and unchanged copies * of SOFA source code files is a "derived work" that must comply * with the following requirements: * * a) Your work shall be marked or carry a statement that it * (i) uses routines and computations derived by you from * software provided by SOFA under license to you; and * (ii) does not itself constitute software provided by and/or * endorsed by SOFA. * * b) The source code of your derived work must contain descriptions * of how the derived work is based upon, contains and/or differs * from the original SOFA software. * * c) The names of all routines in your derived work shall not * include the prefix "iau" or "sofa" or trivial modifications * thereof such as changes of case. * * d) The origin of the SOFA components of your derived work must * not be misrepresented; you must not claim that you wrote the * original software, nor file a patent application for SOFA * software or algorithms embedded in the SOFA software. * * e) These requirements must be reproduced intact in any source * distribution and shall apply to anyone to whom you have * granted a further right to modify the source code of your * derived work. * * Note that, as originally distributed, the SOFA software is * intended to be a definitive implementation of the IAU standards, * and consequently third-party modifications are discouraged. All * variations, no matter how minor, must be explicitly marked as * such, as explained above. * * 4. You shall not cause the SOFA software to be brought into * disrepute, either by misuse, or use for inappropriate tasks, or * by inappropriate modification. * * 5. The SOFA software is provided "as is" and SOFA makes no warranty * as to its use or performance. SOFA does not and cannot warrant * the performance or results which the user may obtain by using the * SOFA software. SOFA makes no warranties, express or implied, as * to non-infringement of third party rights, merchantability, or * fitness for any particular purpose. In no event will SOFA be * liable to the user for any consequential, incidental, or special * damages, including any lost profits or lost savings, even if a * SOFA representative has been advised of such damages, or for any * claim by any third party. * * 6. The provision of any version of the SOFA software under the terms * and conditions specified herein does not imply that future * versions will also be made available under the same terms and * conditions. * * In any published work or commercial product which uses the SOFA * software directly, acknowledgement (see www.iausofa.org) is * appreciated. * * Correspondence concerning SOFA software should be addressed as * follows: * * By email: sofa@ukho.gov.uk * By post: IAU SOFA Center * HM Nautical Almanac Office * UK Hydrographic Office * Admiralty Way, Taunton * Somerset, TA1 2DN * United Kingdom * *----------------------------------------------------------------------- END